Date of Introduction
1970
Model Line Up
Prices at Time of Introduction
Total Number Built
Identification Information
Engines
Engine: Nissan A12 series
Capacity: 1172cc (71.4 cubic inches)
Type: Conventional, watercooled four stroke, reciprocating piston, single overhead cam
Number of Cylinders: 4
Configuration: Front mounted, longitudinal, inline. Front engine rear wheel drive
Head Design: Pushrod and rocker actuated ohv, 2 valves per cylinder
Fuel System: Naturally aspirated, 2 barrel hitachi DCG286 downdraft type carburettor
Bore and Stroke: 73mm (2.87 inches) x 70mm (2.32 inches)
Power: 51kW (68hp) @ 6 000rpm
Torque: 96Nm (71 ft-lbs) @ 4000rpm
Compression Ratio: 9:1
Transmissions
Type: 4 Speed Manual, Synchromesh on all gears
1st: 3.76:1
2nd: 2.17:1
3rd: 1.4:1
4th: 1.00:1
R: 3.64:1
Type: 3 Speed Automatic Jatco L3N
1st: 2.46:1
2nd: 1.46:1
3rd: 1.00:1
R: 2.18:1
Rear Axle
Type: Hypoid Bevel Differential
Ratio: 4.11
Clutch
Single cushion disc, dry plate clutch
Chassis
Monocoque (Unibody)
Suspension
Front: MacPherson Strut front suspension, telescopic shock absorbers, coil springs
Rear: Live axle rear suspension, semi elliptic leaf springs, telescopic shock absorbers
Steering
Ball and Nut
Turning Circle: 8.2m (26.9ft)
Brakes
Hydraulic duo servo brake system
Front: 203mm (8 inch) Drum brakes, 2 leading shoes
Rear: 203mm (8 inch) Drum brakes, trailing and leading shoes
Hand Brake: Mechanically operated on rear wheels
Front disc brakes optional
Electrical
12 volt coil and alternator
Battery capacity: 40(ah)
Exhaust
Single tail pipe
Wheels
12 inch, pressed steel
Tyres
Dunlop Dunsafe, 6.00x 12
Tyre Pressure: 17psi
Exterior Dimensions (Sedan)
Wheelbase: 2300mm (90 inches)
Length: 3830mm (152 inches)
Width: 1495mm (59.6 inches)
Height: 1390mm (53.1 inches)
Kerb Weight: 700kg (1640lbs)
Front Track: 1240mm (48.8 inches)
Rear Track: 1245mm (49 inches)
Ground Clearance: 170mm (6.7 inches)