Date of Introduction
August 1967
Model Line Up
Prices at Time of Introduction
Total Number Built
Identification Information
Engines
Engine: Nissan A12 series
Capacity: 1172cc (71.4 cubic inches)
Type: Conventional, watercooled four stroke, reciprocating piston, single overhead cam
Number of Cylinders: 4
Configuration: Front mounted, longitudinal, inline. Front engine rear wheel drive
Head Design: Pushrod and rocker actuated ohv, 2 valves per cylinder
Fuel System: Naturally aspirated, 2 barrel hitachi DCG286 downdraft type carburettor
Bore and Stroke: 73mm (2.87 inches) x 70mm (2.32 inches)
Power: 51kW (68hp) @ 6 000rpm
Torque: 96Nm (71 ft-lbs) @ 4000rpm
Compression Ratio: 9:1
Transmissions
Type: 4 Speed Manual, Synchromesh on all gears
1st: 3.38:1
2nd: 2.00:1
3rd: 1.31:1
4th: 1.00:1
R: 3.64:1
Type: 3 Speed Automatic Borg Warner
1st: 2.39:1
2nd: 1.45:1
3rd: 1.00:1
R: 2.09:1
Rear Axle
Type: Hypoid Bevel Differential
Ratio: 4.11
Clutch
Single cushion disc, dry plate clutch
Chassis
Monocoque (Unibody)
Suspension
Front: MacPherson Strut front suspension, telescopic shock absorbers, coil springs
Rear: Independent, semi trailing arms (Sedan), Solid rear live axle and leaf springs
Steering
Recirculating ball, 15:1 ratio
Turning Circle: 9.6m (31.5ft)
Brakes
Hydraulic duo servo brake system
Front: 232mm (9.1 inch) Disc brakes
Rear: 228mm (9 inch) Drum brakes, trailing and leading shoes
Hand Brake: Mechanically operated on rear wheels
Electrical
12 volt coil and alternator
Battery capacity: 40(ah)
Exhaust
Single tail pipe
Wheels
13 inch, pressed steel
Tyres
5.60x 13
Exterior Dimensions (Sedan)
Wheelbase: 95.3 inches (2 420mm)
Length: 163 inches (4 128mm)
Width: 61.4 inches (1 560mm)
Height: 65 inches (1 410mm)
Kerb Weight: 2 072 lbs (940kg)
Front Track: 1270mm (50 inches)
Rear Track: 1270mm (50 inches)
Ground Clearance: 215mm (8.5 inches)